European manufactured air operated diaphragm pumps, are a versatile solution for applications including fuels, chemicals, waste water and food products of viscosities up to 50,0000cP and solids up to 10mm.

European manufactured vertically immersed pumps including models for transferring clean lubrication oils from storage containers and vortex and cutter impeller models for solid laden waste water and slurries.

European manufactured multistage centrifugal pumps, designed for the high pressure transfer of water and other clean, low viscosity fluids in applications such as pressure boosting, circulation and large volume transfer across long distances.

European manufactured side channel pumps for high pressure pumping of most clean fluids including water, fuels, light lubricants, gaseous liquids and chemicals such as ammonia pumped at close to boiling point.

European manufactured triple screw pumps, designed for applications including fuels, oils and lubricants thanks to their ability to handle fluctuating flow and pressure without losing efficiency.

European manufactured centrifugal pumps, designed for applications including fresh and seawater cooling, water transfer and circulation, low viscosity fuels and lubricant transfer, boiler feed and HVAC.

Features • Compact and effective. • Maximum recycling of waste streams. • Ease of Operation. • Cost effective vs. transport and disposal option. • Reduces liquid waste and disposal costs. • Reduces water consumption - by liquid re-cycling. • Highly effective in clear water drilling. Operational Overview Chemically enhanced Centrifugation is the process of removing the majority of colloidal size solids in excess of used water base drilling mud by the addition of chemicals to coagulate and flocculate the solids in the mud thus blended chemically enhanced fluid is pumped to centrifuge. Without chemical enhancement or the dewatering process, the mechanical liquid solids separation capability of a centrifuge is limited to 3-5 microns. Thus dewatering overcomes this limitation by “flocculation” of the feed mud by pre-treating the mud chemically to increase the “effective particle size” of the suspended solids.

Features • Stacked leaves provide a very high surface area • Large surface area and corrugated plate design promotes efficient gas removal • Gas extraction from the side • Large access door • Vertical design decreases footprint • Automatic vacuum and flow rate minimises operator intervention • Easy inspection and maintenance Operational Overview The vacuum degasser uses a series of stacked, corrugated baffle plates and several feed ports to distribute the drilling fluid and encourage high fluid contact and turbulence within a vacuum chamber. A vacuum pump produces a low pressure condition inside the chamber that helps release the gas bubbles from the mud. A jet pump (venturi) draws the de-gassed mud from the bottom of the degasser chamber and discharges into a receiving tank.

Engine Manufacturer/Supplier: Caterpillar Component supplier: Pyroban – Amot - Broadland

The 900/350Containerised Rigsafe air compressor package is a versatile and robust product. The units have a wide range of applications and are ideal for remote location operation in high ambient conditions.Ease of operation is key when operation in these environments. All the units are mounted in DNV certified lifting frames and are supplied with full certification. The units can be stacked in operation to reduce the operating footprint on location. Options: • Air Coolers • Drier packs • Pressure reducing valves • Experienced Operators

Engine Manufacturer/Supplier: Caterpillar Transmission Automatic 5 speed: Allison HT754CR Component supplier: Pyroban – Amot - Broadland

Engine Manufacturer/Supplier: Caterpillar Transmission Automatic 5 speed: Allison HT754CR Component supplier: Pyroban – Amot - Broadland

Engine Manufacturer/Supplier: Caterpillar Component supplier: Pyroban – Amot - Broadland

McFarland-Tritan, LLC's positive displacement reciprocating plunger pumps are durable and reliably engineered as a hydrostatic test pump and chemical metering pump. Intrinsically safe, due to their non-electric air/gas driven design, these pumps use corrosion resistant materials for use in difficult and hazardous areas, such as offshore oil/gas platforms. McFarland-Tritan, LLC offers air operated/gas driven pumps in sizes ranging from the single head plunger pump, Mac-24, for intermediate high pressure testing and injection, to larger versions at higher pressures and dual stage pumps, Mac-14 and Mac-28 Two-Stage. See descriptions below for sizes in between.

These pumps are designed to API675 specifications.

The WOMA pump is designed for continuous pumping with Duplex fluid ends and ceramic plungers

• Fully Zone 2 compliant • Packaged in DNV stackable container • Onboard charge pump and filtration system • Onboard 250-liter water tank • ECV valve compensates for multiple tools to maintain pressure • 240-liter fuel tank • 2,100 pump RPM • 10 Micron Filtration • Internal ATEX Lighting

The Rig Safe 760 CFM air compressors are ideal for use in hazardous areas with adjustable pressure rating to 200PSI. All units are containerized and stackable uniquely designed to provide operating personnel with the ability to access and operate upper level units when stacked from within the unit through internal access hatches. This fully internal design provides enhanced safety for operating personnel whilst eliminating requirements for scaffolding which further reduces precious foot print space

The Rig Safe 760 CFM air compressors are ideal for use in hazardous areas with adjustable pressure rating to 300PSI. All units are containerized and stackable uniquely designed to provide operating personnel with the ability to access and operate upper level units when stacked from within the unit through internal access hatches. This fully internal design provides enhanced safety for operating personnel whilst eliminating requirements for scaffolding which further reduces precious foot print space

The Rig Safe 900 CFM air compressors are ideal for use in hazardous areas with adjustable operating pressure of 15 bar. All units are containerized and stackable uniquely designed to provide operating personnel with the ability to access and operate upper level units when stacked from within the unit through internal access hatches. This fully internal design provides enhanced safety for operating personnel whilst eliminating requirements for scaffolding which further reduces precious foot print space

The Rig Safe 900 CFM air compressors are ideal for use in hazardous areas with adjustable pressure rating to 150PSI. All units are containerized and stackable uniquely designed to provide operating personnel with the ability to access and operate upper level units when stacked from within the unit through internal access hatches. This fully internal design provides enhanced safety for operating personnel whilst eliminating requirements for scaffolding which further reduces precious foot print space Features: All Containerized (DNV 2.7-1) Compressors • Heavy duty, fully bunded DNV2.7-1 offshore container • Designed for stacking in use - ISO Blocks for locked-on safety • Internal personnel access way between units when stacked • All-pneumatic starting and shutdown systems • Compact footprint - transport three in a 40ft shipping container • High capacity on-board fuel tanks • Direct drive fan (No fan belts to wear out) Options: • Air treatment - aftercooling, filtration and drying