Torquemaster model 8026 (refurbished & renewed)

Torquemaster model 8025 (refurbished & renewed)

Features • Compact and effective. • Maximum recycling of waste streams. • Ease of Operation. • Cost effective vs. transport and disposal option. • Reduces liquid waste and disposal costs. • Reduces water consumption - by liquid re-cycling. • Highly effective in clear water drilling. Operational Overview Chemically enhanced Centrifugation is the process of removing the majority of colloidal size solids in excess of used water base drilling mud by the addition of chemicals to coagulate and flocculate the solids in the mud thus blended chemically enhanced fluid is pumped to centrifuge. Without chemical enhancement or the dewatering process, the mechanical liquid solids separation capability of a centrifuge is limited to 3-5 microns. Thus dewatering overcomes this limitation by “flocculation” of the feed mud by pre-treating the mud chemically to increase the “effective particle size” of the suspended solids.

BJ VARCO PS-30 TON W/ 5.1/2" SLIP ASSEMBLY

Stock Equipment : New, unused Quantity : 1 off Service : Containerized Instrument and Utility Air Package Equipment : 2 x 100% Compressors EPF-13-1-K-01-A/B Type : 75 HP Rotary Screw Brand : Ingersoll-Rand Design Capacity : 299 SCFM @ 145 psig Voltage : 460 VAC, 3 ph, 60 Hz. Certification : IP55 Equipment : 2 x 100% Air Dryers EPF-13-1-D-01-A/B Brand : Ingersoll-Rand Model : HL-160 Design Capacity : 160 SCFM @ 102 psig Max. Operating Pressure : 12 barg Equipment : 1 x 100% Dry Air Receiver EPF-13-1-V-01-B Type : Horizontal Design Capacity : 1.5 m3 Size : 1200 (D) X 1000 (H) mm Design Pressure : 200 psig Design Temperature : 150 degF External Painting : Expro Standard 3 Coat Epoxy Paint Equipment : 1 x 100% Wet Air Receiver EPF-13-1-V-01-A Type : Horizontal Design Capacity : 1.5 m3 Size : 1200 (D) X 1000 (H) mm Design Pressure : 200 psig Design Temperature : 150 degF External Painting : Expro Standard 3 Coat Epoxy Paint

Flare Stack Package- Stock Equipment , New –unused consisting of the main following equipment items: Description 26" Equivalent Diameter Air Assisted Flare Tip (316SS / A-105N) EPF-08-0-FL-01 Qty 1 Air-Assist Flare Burner Blower / Motor Skid Unit. EPF -08-0-K-01-A/B 2 Flare Ignition Control Panel (120VAC / Hazardous Area) EPF-08-0-A-01 1 Flareon Energy Efficient Pilots (310SS/316SS). 3 Flareon High Energy Pilot Ignitors (10,000V AC). 3 Flareon Single Element Pilot Flame Proving Thermocouples (310SS). 3 46.3 meter Guy # Supported Flare Stack (CS). 1 Maintenance Platform, Four (4) Rest Platforms and five (5) Caged Ladders (max 9m). 1 Set of Flare Stack Mineral Insulated Power / Thermocouple Cable (50m). 1 Set of Standard Power / Thermocouple Cable (60m). 1 One (1) Set of Pilot Fuel Gas, Manual Flame Front Generator and Manual Fuel Gas Back-up 1 Instrumentation One (1) ICP / Instrumentation Skid (CS). 1

Stock Equipment : New, unused Quantity : 1 off Service : Closed Drain Vessel (EPF-07-1-V-01) Type : Horizontal Size : 83” ID x 35’ T/T Design Pressure : FV/150 psig Design Temperature : 350 degF Design Code : ASME VIII Div. 1 U Stamp + NACE Corrosion Allowance : 3.0 mm Internal Lining : No External Painting : Vendor Standard 3 Coat Epoxy Paint ISO 15156/MR0175 : Yes MOC – Shell & Heads : SA 516 GR 70 MOC – Internals : NA

Stock Equipment : New, unused Quantity : 1 off Service : Open Drain Pumps Skid Type : Wilden AODD Pump Pump model : XPX200 Rated flow : 550 BPD Design Pressure : 125 psig Dif. pressure : 50 psi Design Temperature : 220 degF Nozzle sizes : 1” ANSI 150# Inlet and discharge MOC : PTFE Diaphragms, SS316 Wetted Parts & Outer Piston

Stock Equipment : New, unused Quantity : 1 off Service : Closed Drain Pumps (EPF-07-1-P-04-A/B) Type : Positive Displacement, Borger Rotary Lobe Pump, 7.5 kW, 480V, 3Ph, 60Hz. Pump model : PL200 Rated flow : 18 m3/h Design Pressure : 16 Barg Dif. pressure : 8.96 bar Design Temperature : 180 degC Nozzle sizes : 3” ANSI 150# discharge Hazardous Area : Class I, Div. 2 MOC - Casing : Cast Iron

Stock Equipment : New, unused Quantity : 1 off Service : Diluent Pumps Skid (EPF-04-1-PK-02) Metering Skid (EPF-04-1-PK-03) Type : Centrifugal, Multistage 185kW, 480V, 3Ph, 60Hz Pump Model : DF85-125x4 Rated flow : 13,200 BPD Design Pressure : 1137 psig Dif. head : 457 m Design Temperature : 200 degF Nozzle sizes : 4” ANSI 600# RF suction and discharge Hazardous Area : Class I, Div. 2 MOC - Casing : Carbon Steel MOC – Impeller : CA 15

Stock Equipment : New, unused Quantity : 1 off Service : Fuel Gas Conditioning Skid Equipment : 1 off Fuel Gas Scrubber Type : Vertical Size : 18” OD x 8’ FOF/T Design Pressure : FV/210 psig Design Temperature : 200 degF Design Code : ASME VIII Div. 1 U Stamp Corrosion Allowance : 3.0 mm Internal Lining : No External Painting : Expro Standard 3 Coat Epoxy Paint ISO 15156/MR0175 : Yes MOC – Shell : SA 516 GR 70 MOC – Internals : SS 316L demister Equipment : 1 off Fuel Gas Heater Type : 20kW, 480V, 3Ph, 3 wire delta, 60Hz, Single Stage Size : 4” NB ID x 4’-7” Bundle Length Design Pressure : FV/210 psig Design Temperature : 200 degF Design Code : ASME VIII Div. 1 Certification : Ex II 2G, Exe IIC T3 Gb. Corrosion Allowance : 3.0 mm External Painting : Expro Standard 3 Coat Epoxy Paint ISO 15156/MR0175 : Yes MOC – Shell : ASTM A106-B MOC – Internals : Tubesheet ASTMA105-N Baffle SS 316L

Stock Equipment : New, unused FIT skid as per P&ID Quantity : 1 off Service : FIT EPF-01-1-FIT-030321 Turbine Flowmeter : Cameron, NUFLO Liquid Turbine Flowmeter Nominal Flow Range : 8,600 – 86,000 BPD Design Pressure : 1300 psig Design Temperature : 200 degF Meter Nozzle sizes : 6” ANSI mates any ANSI RF up to 1500# Piping Nozzle sizes : 8” ANSI 600# RF inlet and outlet MOC - Body : SS 316L MOC – Rotor : CD-4MC-Cu (Ni Plated) MOC – Flanges : ASTM A105 Flow Totalizer : Fluidwell, E018-P-CR-HA-IB-OT-PD-XD-ZX Hazardous Area : Class I, Div. 2 Certification : Exd, IP67

Stock Equipment : New, unused pump manifold skid as per P&ID Quantity : 1 off (4 skids) Service : Crude Export Pumps Manifold Skid complemented with pumps suction and discharge instrumentation and PSVs. Size : Pump Manifold 20” suction and 12” discharge sized for 100,000 BPL. All other pipework sized for 38,000 BPD Nozzle sizes : 20” ANSI 150# RF inlet and 12” ANSI 600# RF outlet Instrument Hazardous Area : Class I, Div. 2

Stock Equipment : New, unused Quantity : 1 off Service : Offspec Oil Pump Skid (EPF-01-1-PK-10) Type : Positive Displacement, External gear 22kW, 480V, 3Ph, 60Hz Pump Model : RNX100M Rated flow : 5,500 BPD Design Pressure : 232 psig Dif. pressure : 130 psi Design Temperature : 200 degF Nozzle sizes : 4” ANSI 150# RF drilled to ANSI 150# RF suction and discharge Hazardous Area : Class I, Div. 2 MOC - Casing : Cast Steel MOC – Stator Gears : SS 316

Stock Equipment : New, unused Quantity : 1 off Service : Second Stage Booster Pump Skid (EPF-01-1-PK-03) Type : Positive Displacement, Twin Screw 110kW, 480V, 3Ph, 60Hz Pump Model : 2HM4200-100 Rated flow : 33,550 BPD Design Pressure : 319 psig Dif. pressure : 105 psi Design Temperature : 350 degF Nozzle sizes : 10” ANSI 300# RF drilled to ANSI 150# RF suction and discharge Hazardous Area : Class I, Div. 2 MOC - Casing : Cast Steel MOC – Stator Gears : Nitrited Steel

Service : First Stage Booster Pump Skid (EPF-01-1-PK-02) Type : Positive Displacement, External Gear 110kW, 480V, 3Ph, 60Hz Pump Model : NDX 100L Rated flow : 30,800 BPD Design Pressure : 232 psig Dif. pressure : 120 psi Design Temperature : 200 degF Nozzle sizes : 10” ANSI 300# RF drilled to ANSI 150# suction and discharge Hazardous Area : Class I, Div. 2 MOC - Casing : Cast Steel MOC – Stator Gears : SS316