All units are containerized and stackable space saving and easy access. The ARP pump is designed for continuous pumping operations with Duplex fluid ends and ceramic plungers

All units are containerized and stackable space saving and easy access. The ARP pump is designed for continuous pumping operations with Duplex fluid ends and ceramic plungers.

The Zone II product line of air compressors range from 875 to 1060 CFM and pressure from 125 to 200 PSI that are ideal for use in hazardous areas. All units are containerized and stackable. They are uniquely designed to provide operating personnel with the ability to access and operate upper level units when stacked from within the unit through internal access hatches. This fully internal design provides enhanced safety for operating personnel whilst eliminating requirements for scaffolding which further reduces precious foot print space

The OFM 600 pumping fully containerized. The pumps are appropriate for intermittent full load pumping operations. This includes applications such as water injection, reverse circulation, well killing, acidizing and cementing operations

Units are single skid small footprint DNV light weight for space saving. The FMC M13 API pumps are designed for continuous duty operations

These units are 2 Piece DNV small footprint light weight for space saving. The FMC M13 API pumps are designed for continuous Duty operations at 84 HP

2 Piece DNV small footprint light weight for space saving. The TRU FLO 20/100 pumps are designed with vacuum assist pump priming system

BJ VARCO PS-30 TON W/ 5.1/2" SLIP ASSEMBLY

Varco Weldless 750 Ton Link Set

Varco Weldless 1000 Ton Link Set

Varco Weldless 1000 Ton Link Set

Multiple Products

Stock Equipment : New, unused Quantity : 1 off Service : Containerized Instrument and Utility Air Package Equipment : 2 x 100% Compressors EPF-13-1-K-01-A/B Type : 75 HP Rotary Screw Brand : Ingersoll-Rand Design Capacity : 299 SCFM @ 145 psig Voltage : 460 VAC, 3 ph, 60 Hz. Certification : IP55 Equipment : 2 x 100% Air Dryers EPF-13-1-D-01-A/B Brand : Ingersoll-Rand Model : HL-160 Design Capacity : 160 SCFM @ 102 psig Max. Operating Pressure : 12 barg Equipment : 1 x 100% Dry Air Receiver EPF-13-1-V-01-B Type : Horizontal Design Capacity : 1.5 m3 Size : 1200 (D) X 1000 (H) mm Design Pressure : 200 psig Design Temperature : 150 degF External Painting : Expro Standard 3 Coat Epoxy Paint Equipment : 1 x 100% Wet Air Receiver EPF-13-1-V-01-A Type : Horizontal Design Capacity : 1.5 m3 Size : 1200 (D) X 1000 (H) mm Design Pressure : 200 psig Design Temperature : 150 degF External Painting : Expro Standard 3 Coat Epoxy Paint

Flare Stack Package- Stock Equipment , New –unused consisting of the main following equipment items: Description 26" Equivalent Diameter Air Assisted Flare Tip (316SS / A-105N) EPF-08-0-FL-01 Qty 1 Air-Assist Flare Burner Blower / Motor Skid Unit. EPF -08-0-K-01-A/B 2 Flare Ignition Control Panel (120VAC / Hazardous Area) EPF-08-0-A-01 1 Flareon Energy Efficient Pilots (310SS/316SS). 3 Flareon High Energy Pilot Ignitors (10,000V AC). 3 Flareon Single Element Pilot Flame Proving Thermocouples (310SS). 3 46.3 meter Guy # Supported Flare Stack (CS). 1 Maintenance Platform, Four (4) Rest Platforms and five (5) Caged Ladders (max 9m). 1 Set of Flare Stack Mineral Insulated Power / Thermocouple Cable (50m). 1 Set of Standard Power / Thermocouple Cable (60m). 1 One (1) Set of Pilot Fuel Gas, Manual Flame Front Generator and Manual Fuel Gas Back-up 1 Instrumentation One (1) ICP / Instrumentation Skid (CS). 1

Stock Equipment : New, unused Quantity : 1 off Service : Closed Drain Vessel (EPF-07-1-V-01) Type : Horizontal Size : 83” ID x 35’ T/T Design Pressure : FV/150 psig Design Temperature : 350 degF Design Code : ASME VIII Div. 1 U Stamp + NACE Corrosion Allowance : 3.0 mm Internal Lining : No External Painting : Vendor Standard 3 Coat Epoxy Paint ISO 15156/MR0175 : Yes MOC – Shell & Heads : SA 516 GR 70 MOC – Internals : NA

Stock Equipment : New, unused Quantity : 1 off Service : Open Drain Pumps Skid Type : Wilden AODD Pump Pump model : XPX200 Rated flow : 550 BPD Design Pressure : 125 psig Dif. pressure : 50 psi Design Temperature : 220 degF Nozzle sizes : 1” ANSI 150# Inlet and discharge MOC : PTFE Diaphragms, SS316 Wetted Parts & Outer Piston

Stock Equipment : New, unused Quantity : 1 off Service : Closed Drain Pumps (EPF-07-1-P-04-A/B) Type : Positive Displacement, Borger Rotary Lobe Pump, 7.5 kW, 480V, 3Ph, 60Hz. Pump model : PL200 Rated flow : 18 m3/h Design Pressure : 16 Barg Dif. pressure : 8.96 bar Design Temperature : 180 degC Nozzle sizes : 3” ANSI 150# discharge Hazardous Area : Class I, Div. 2 MOC - Casing : Cast Iron

Stock Equipment : New, unused Quantity : 1 off Service : Diluent Pumps Skid (EPF-04-1-PK-02) Metering Skid (EPF-04-1-PK-03) Type : Centrifugal, Multistage 185kW, 480V, 3Ph, 60Hz Pump Model : DF85-125x4 Rated flow : 13,200 BPD Design Pressure : 1137 psig Dif. head : 457 m Design Temperature : 200 degF Nozzle sizes : 4” ANSI 600# RF suction and discharge Hazardous Area : Class I, Div. 2 MOC - Casing : Carbon Steel MOC – Impeller : CA 15

Stock Equipment : New, unused Quantity : 1 off Service : Fuel Gas Conditioning Skid Equipment : 1 off Fuel Gas Scrubber Type : Vertical Size : 18” OD x 8’ FOF/T Design Pressure : FV/210 psig Design Temperature : 200 degF Design Code : ASME VIII Div. 1 U Stamp Corrosion Allowance : 3.0 mm Internal Lining : No External Painting : Expro Standard 3 Coat Epoxy Paint ISO 15156/MR0175 : Yes MOC – Shell : SA 516 GR 70 MOC – Internals : SS 316L demister Equipment : 1 off Fuel Gas Heater Type : 20kW, 480V, 3Ph, 3 wire delta, 60Hz, Single Stage Size : 4” NB ID x 4’-7” Bundle Length Design Pressure : FV/210 psig Design Temperature : 200 degF Design Code : ASME VIII Div. 1 Certification : Ex II 2G, Exe IIC T3 Gb. Corrosion Allowance : 3.0 mm External Painting : Expro Standard 3 Coat Epoxy Paint ISO 15156/MR0175 : Yes MOC – Shell : ASTM A106-B MOC – Internals : Tubesheet ASTMA105-N Baffle SS 316L

Stock Equipment : New, unused FIT skid as per P&ID Quantity : 1 off Service : FIT EPF-01-1-FIT-030321 Turbine Flowmeter : Cameron, NUFLO Liquid Turbine Flowmeter Nominal Flow Range : 8,600 – 86,000 BPD Design Pressure : 1300 psig Design Temperature : 200 degF Meter Nozzle sizes : 6” ANSI mates any ANSI RF up to 1500# Piping Nozzle sizes : 8” ANSI 600# RF inlet and outlet MOC - Body : SS 316L MOC – Rotor : CD-4MC-Cu (Ni Plated) MOC – Flanges : ASTM A105 Flow Totalizer : Fluidwell, E018-P-CR-HA-IB-OT-PD-XD-ZX Hazardous Area : Class I, Div. 2 Certification : Exd, IP67