NOV Mission Magnun - Brine Mix Transfer Pump

Motor: 200 HP, 1750 RPM, Class I Group C&D Explosion-proof electric motor, T3C temp. code, 50°C ambient, 480 volt, 3-phase 60 cycle. Includes 230 V single-phase space heaters.

Base Preparation: Seal-welded and pre-drilled prior to sandblasting to near white metal and coated with inorganic zinc. After an initial coat of inorganic zinc, the unit painted, with an intermediate coat of epoxy and a topcoat of blue polyurethane.

Testing and Review: ABS design review, witness hydro-test, Performance-test, and Mechanical-test included.

Technical Specifications:

The 8x6x14 refers to the same nominal sizing as Unit 1 (8" discharge, 6" suction, 14" max impeller).

Pump Type: Horizontal Centrifugal Sand/Mud Pump | Magnum I series, for mixing/transfer of heavy abrasive fluids (up to 2.5 SG); ideal for brine agitation.

Sizes / Dimensions- Discharge: 8"- Suction: 6"- Impeller Max Diameter: 14" (trimmed to 13" in this unit) - Overall Length (approx.): 72-96" (horizontal skid-mounted) Shaft Diameter: 2.5"

Bearing Span: 3" between bearings | Horizontal design with flexible coupling; weight ~900-1,400 lbs (dry, without motor). OSHA guard included.

Performance - Max Capacity: 260-590 m³/h (1,150-2,600 GPM) - Max Head: 28-62 m (92-203 ft)- Rated Capacity (at 1750 RPM): Up to 1,000 GPM at 164 ft

Efficiency: 65-70% - NPSHR: 4.5 m (at rated point) | Tuned for 1,000 GPM @ 164 ft TDH with 2.2 SG brine; speed 1,450-1,800 RPM (unit at 1,750 RPM).